|
T-0936S SMT 9mm-width type
(Seperate excitation IC drive feasibility)
 |
| Features |
*
|
Slim, low-profile design (3.2mm max*) and high power.
(* height on board is 3.2mm max. Pit type)
|
| * |
PCB width is 10mm,because pit wide is 7.1mm. |
| * |
Supports reflow soldering. (Supports Pb free soldering) |
| * |
Supports automatic mounting. (Tray type)
|
| * |
High efficiency possible by using separate excitation IC. |
|
|
| Applications |
| * |
Note PC (up to 14inches) |
| * |
PDA |
| * |
Portable DVD player
|
|
|
| Electrical characteristics |
| Part No. |
Max. outputpower
(w) |
Frequency
(KHz) |
Max. output voltage
(VO-p) |
OutputOpen voltage
(VO-P) |
Withstand voltage(AC60Hz)(Vrmss) |
| Between 1ST&2nd windings |
Between 2NDWinding& ore |
| CD-T-0936S |
3(4.5W)<*1> |
50-200 |
2000<*2> |
2800<*3> |
500 |
500 |
Connection diagram (typical example)
| Gap(3Item)vs. AL |
| Gap [mm] |
AL [nH/N²] |
| NON |
- |
| 0.075 |
85 |
| 0.10 |
80 |
| 0.15 |
70 |
|
|
|
Notes
The T-0936 is not usable in a floating type circuit.
Be sure to ground the No.4 pin of the secondary winding.
Customized specifications are available according to input-output characteristics.*1: The maximum output (up to 3.5W)
And efficiency depend on operating conditions. *2: The maximum output voltage varies according to winding specifications.
*3: The output open voltage within 3 seconds varies according to winding specifications.
| Shapes and dimensions |
 |
|
Note:Must not pattern on the transformer bottom Unit:mm
|
|
|
|
| Recommended landing pattern and drop dimensions
|
|
 |
|
Unit: mm
|
|
