Get Big Picture !
|The Sensei Series of isolated dc-dc power moduels deliver exceptional electrical and
thermal performance in industry-standard footprints for isolated brick
power modues. These are the power modules of choice for Intermediate Bus Architecture
(IBA) and Distributed Power Architecture (DPA) applications that require
high efficiency and high reliability in elevated temperature environments
with low airflow.
The FPKR40S01205*A power module of the Sensei Series is 1/16 Brick power module that operates from a 9.6Vdc to 72Vdc input and provides a tightly regulated 12Vdc output. It delivers up to 5A of output current. The thermal performance of the FPKR40S01205*A is excellent: no derating is needed up to 70°C with 300LFM airflow and 12Vinput.
This leading edge thermal performance results from electrical, thermal and packaging design that is optimized for high density circuit card conditions. Extremely high quality and reliability are achieved through advanced circuit and thermal design techniques and FDK's state of the art in-house manufacturing processes and systems.
Get Data-Sheet Click Here ! (PDF)
Intermediate Bus Architecture
Distributed Power Architecture
Computing (Servers, Workstations)
Delivers up to 5A (60W)
Output available: 12Vdc
Same as industry-standard 1/16 brick pinout
Small size and low profile: 1.30" x 0.9" x 0.27" typ.
No minimum load required
Start up into pre-biased output
Input to output isolation: 4000Vdc
Positive or negative logic remote ON/OFF option
Fully protected: OCP, OTP, OVP, UVLO
Output voltage trim (+10% / -10%) using industry-standard trim eqations
UL60950 recognition in U.S. & Canada, and CB Scheme certification per IEC60950(Pending)
All materials meet UL94, V-0 flammability rating
Meets conducted emissions reqirements of FCC Class B and EN55022 Class B with external filter