|The Sensei Series of isolated dc-dc power modules deliver exceptional electrical
and thermal performance in industry-standard footprints for isolated brick
power modules. These are the power modules of choice for Intermediate Bus
Architecture (IBA) and Distributed Power Architecture applications that
require high efficiency and high reliability in elevated temperature environments
with low airflow.
The FPED48T01238*A* power modules of the Sensei Series are eighth brick power modules that operate 48Vdc input and provide a tightly regulated 12V dc output. It delivers up to 37.5A of output current. Its thermal performance is excellent.
This leading edge thermal performance results from electrical, thermal and packaging design that is optimized for high density circuit card conditions. Extremely high quality and reliability are achieved through advanced circuit and thermal design techniques and FDK’s state of the art in-house manufacturing processes and systems.
Get Data-Sheet Click Here ! (PDF)
Intermediate Bus Architecture
Distributed Power Architecture
Computing (Servers, Workstations)
Delivers up to 37.5A/450W
Industry-standard eighth brick footprint and pinout
Small size and low profile: 2.30" x 0.90" x 0.51"
No minimum load required
Start up into pre-biased output
Input to output isolation: 2,250Vdc
Positive or negative logic remote ON/OFF
Fully protected: OCP, OTP, OVP, UVLO
Remote output voltage sense
Output voltage trim using industry-standard trim equations
High reliability, MTBF = TBD Million Hours (30°C)
UL60950 recognition in U.S. & Canada, and CB Scheme certification per IEC60950 (Pending)
All materials meet UL94, V-0 flammability rating
Meets conducted emissions requirements of FCC Class B and EN55022 Class B with external filter